1209 / 4F45 - OEP probe (OpenEmbeddedProbe firmware)
| VID | 0x1209 |
|---|---|
| PID | 0x4F45 |
| Owner | Open Embedded Probe |
| License | MIT |
| Site | https://github.com/Open-Embedded-Probe/oep-probe-arduino |
| Source | https://github.com/Open-Embedded-Probe/oep-probe-arduino |
USB debug probe and test fixture firmware built from the OpenEmbeddedProbe Arduino library (in the Arduino Library Manager as OpenEmbeddedProbe), running on ESP32-P4, RP2350 and RP2040 boards. It speaks the Open Embedded Probe protocol (https://github.com/Open-Embedded-Probe/oep-spec) over USB vendor bulk, HID and CDC: debug wires for WCH CH32 (RVSWD / SWIO) and ARM (SWD), a target console, GPIO / UART fixtures and logic capture. The conditions for using this PID are in https://github.com/Open-Embedded-Probe/oep-probe-arduino/blob/main/PID-USE.md